DIY 16mm contact printer

From PD Research Wiki
Jump to navigation Jump to search

This page documents practice-based research through the design, construction, and testing of a DIY 16mm contact printer. It functions as a working research record, combining iterative prototyping, technical experimentation, and reflective notes. The material is intentionally process-oriented and does not present a finalized device or method.

The printer is informed by historical contact printing machines used for image and sound reproduction, but reinterpreted through DIY construction and contemporary experimental workflows.

Page link to archival and historical research into contact printing technologies:

contact printing for motion picture film


Introduction:

The massive shift to digital technology in the film industry has created an unprecedented situation, leaving the future of 16mm film and other small gauge formats in the hands of artists. Due to its tactile and material nature, photochemical film remains an active and vibrant medium within artist communities, such as artist-run film labs. In recent years, an increasing number of local film lab communities have joined the global network of artist-run film labs. But the possibility of producing prints for 16mm film projection is rapidly disappearing.


Contact printing is not only essential to photochemical moving image production, to make prints, but also serves as a key method for artists exploring alternative structures and aesthetics in experimental filmmaking. However, original industrial contact printers are heavy and complex machines, most of which were manufactured in or before the 1980s. Consequently, accessing professional small gauge film contact printing devices has become increasingly challenging for many new labs, as these machines are no longer produced and are difficult to find or maintain.


WORM Filmwerkplaats, as an artist-run film lab and a partner of the SPECTRAL project, has invited artists and makers to develop various DIY solutions that serve as alternative options for contact printers.

This project began as a spring residency at Filmwerkplaats in March 2024, as part of SPECTRAL's device research. Together with artists and makers Hrvoje Spudić and Matthew McWilliams, we spent a week in the lab building, testing, and exchanging ideas for DIY contact printing solutions. Even before the residency began, all three of us had been working independently on potential approaches. Matthew McWilliams developed a 3D-printed desktop contact printer with a mechanical design inspired by editing tables. Hrvoje Spudić focused on creating an optical soundtrack system using modified film projectors. I had been working the previous year on a laser-cut, DIY slit-scan 16mm motion camera, and realized the same mechanics could be adapted for a DIY contact printer.


The primary difference between Matthew’s and my approach lies in the fabrication method, which led to different mechanical scales and design choices. 3D printing makes it relatively easy to produce curved and circular components, while laser cutting is better suited for flat and angular forms. As a result, the exposure area in Matthew’s printer sits on a curved surface, similar to an editing table, whereas mine is built on a flat plane. Initially, my take-up system used a timing belt and spring to create a slip mechanism through friction. Inspired by Matthew’s design, I later switched to using magnets, which allow the motor to slip when the tension becomes too high—an elegant and low-tech solution.


Both Matthew and I were inspired by Hrvoje’s research, and we believe that optical sound synthesis could be integrated into both of our DIY contact printers. This means the printer itself could also function as an optical sound camera: by playing a digital soundtrack and modulating light (blinking or fading), it would expose the 16mm film’s soundtrack area, creating a variable-density optical soundtrack.

During the residency, I built the first prototype as a proof of concept. Over the following months, I continued to tinker with and refine the design, gradually improving its stability and reliability. By the third prototyping cycle, the printer was producing consistently sharp and stable results.



I call this DIY contact printer SimplePrinter.

Mini-small.jpg

Extend-small.jpg

SimplePrinter

Note: This is an ongoing project. Further updates and improvements are expected in the future.

This device research focuses on building a version of a DIY 16mm contact printer that only uses humble

materials and accessible modern components, making them affordable and accessible to artists and

communities without access to professional equipment. By using laser-cutting fabrication techniques, these

designs are simple and cost-effective to build. Provided with schematics and instructions, others can easily

construct their own versions or adapt the design to suit their needs.

Design principle

The basic idea of contact printing is to ensure that the emulsion side of the image negative touches

the emulsion side of the unexposed film stock. When light is briefly shone through the negative onto

the print stock, the image transfers to the film stock.

DesignPrinciple.png

I started with this basic principle and built the following components around it:

• Exposure light source and electric circuits — responsible for illuminating the negative during printing.

• Transport mechanics — including a motor and custom-designed 16mm perforation sprockets to ensure

precise film movement.

• Take-up mechanics — designed to collect the film while also stopping automatically when a certain

tension is reached, preventing damage.

• Gates — used to control the exposure area and to separate image and sound tracks during printing.

Transport mechanics

2-june-6-pages-draft-8.jpg

Take up mechanics

Take-up.jpg

Gates

Gates.jpg

Printing tests and debugging process

2024: Initial instability and transport-related issues

Early printing tests revealed unstable results, including image position offset and visible jitter.

After multiple test runs, the primary cause was identified as a flaw in the film transport mechanical design.

The negative and raw film stock were allowed to form a slight curve before reaching the transport sprocket roller.

This curvature introduced a length discrepancy between the negative and the raw stock.

As a result, the two film strips advanced unevenly, producing image offset and jitter during printing.

This issue highlighted the sensitivity of contact printing to film path geometry, particularly when transport mechanisms do not enforce strict linear alignment prior to sprocket engagement.

2025 May–June: Revised transport design and mechanical alignment

In May and June 2025, a revised transport mechanism was designed and implemented. All components of the transport system were carefully marked, aligned, and reassembled to ensure consistent geometry across modules. Excess adhesive from earlier fabrication stages was removed to reduce unintended mechanical interference.

Scanned test footage from this period shows a significant improvement in image stability:



While most image offset issues were resolved, minor image jitter persisted. Notably, this jitter appeared in repeating cyclical patterns rather than as random instability.


Identification of eccentric motion in drive components

Further investigation suggested that the remaining jitter originated from the DC motor or the driving sprocket roller. Slow-motion recordings of the film transport revealed subtle eccentric movement in the motor shaft and motor coupler. These imperfections are consistent with minor manufacturing tolerances rather than assembly errors.

Given the intention to work with readily available components rather than precision-machined parts, the focus shifted from eliminating these imperfections to compensating for them through design adjustments.

Two corrective actions were implemented:

1. The sprocket roller was flipped inside out, positioning the sprocket teeth as close as possible to the motor shaft in order to minimize leverage effects caused by eccentric motion.
2. Two drops of super glue were applied evenly around the motor shaft and allowed to dry, slightly increasing the shaft diameter to achieve a tighter fit with the motor coupler.

After these adjustments, visible jitter was largely eliminated. While minimal residual motion can still be perceived under close inspection, it is nearly imperceptible in normal viewing conditions.


Historical reflection on mechanical tolerances

This debugging process prompted reflection on historical contact printers, particularly early models such as the Bell & Howell Model D/J printers developed in the 1910s. Mechanical fabrication during that period lacked the precision available today, and eccentric motion in motor shafts under load would have been unavoidable.

In 16mm printing, such eccentric motion typically produces vertical image displacement that repeats once per rotation. The large diameter of the driving sprocket in Bell & Howell contact printers can be understood as a design strategy to distribute this motion across many frames. By spreading small mechanical errors over a longer rotational cycle, visible jitter is reduced and becomes less perceptible.


Printing image and sound together

After image stability was achieved, testing shifted toward printing with a gate that separates image and soundtrack areas. This configuration allows image and optical sound to be printed independently or in combination, enabling the production of a final release print with optical sound.

This process requires both an image negative and a sound negative. At present, image testing is conducted using found footage available in the laboratory, while no dedicated sound negative has yet been produced.

During the Filmwerkplaats 2024 Spring residency, Hrvoje Spudić developed an optical soundtrack using modified film projectors and a density-variation system. The result was a positive optical sound print.

This positive print is now used as a surrogate sound negative for testing with the DIY contact printer. Due to the inversion of the emulsion during printing, the image runs backward while the soundtrack runs forward, and vice versa.


This workflow raised a broader research question: rather than adapting existing optical sound materials, why not develop a DIY device capable of producing soundtracks directly?


This question led to the development of a sound camera and workflow for producing variable-density optical soundtracks on 16mm film.


Variable Density Soundtrack Research



Color correction and light source experiments

After stabilizing both image transport and the printing gate, testing expanded to include color correction in analog printing.

Commercial print film stocks are manufactured for tungsten-balanced light sources, typically around 3200 K. The DIY contact printer, however, uses LED light sources with a color temperature between 5500 K and 6000 K.

To achieve neutral color reproduction, experiments were conducted using color filtration at the light source to compensate for this mismatch. Through repeated testing, a combination of color filters was identified that produces satisfactory results.

ECN color print tests with various color filtering adjustments:


Derived Constraints and Building Notes

The following notes summarize constraints identified through iterative testing and debugging of the DIY 16mm contact printer. These points are not intended as general instructions, but as observations derived from this specific prototyping process.

1. All transport components must be precisely aligned. Minor misalignment accumulates across the film path and directly affects image stability during printing.
2. The take-up mechanism should apply minimal tension—only enough to collect exposed film without exerting pull on the transport system. Excess tension introduces image offset and jitter.
3. The motor shaft and coupler must fit as snugly as possible. Rotary motion should remain centered, as even small eccentricities in the drive system can result in cyclic image displacement.
4. A larger-diameter sprocket roller can significantly reduce the visible impact of motor shaft eccentricity and vibration caused by manufacturing tolerances. Increasing sprocket diameter distributes rotational error across more frames, making jitter less perceptible.


At the end of the prototyping, I also made another design to increase the sprocket roller from 12 teeth to 20 teeth in order to enhance the stability of the images.

all versions of the fabrication files here:

1. File:Final-simple-printer-mini-updated-05-11-2025.pdf File:Final-simple-printer-mini-updated-05-11-2025.svg.zip

2. File:20T simple printer-6-11-2025.pdf

Device Presentation and Current Configurations

The DIY contact printer and related experimental devices were presented during the Back to the Future Festival 2025, organized by Filmwerkplaats and hosted at WORM in Rotterdam.

The presentation focused on the device as an evolving research apparatus rather than a finalized tool. Multiple configurations were shown to illustrate different stages and directions of development.

Small-devices.png

Left: Simple printer (extended configuration), capable of printing up to approximately 3 minutes of footage.
Middle: Simple printer Pro, capable of printing approximately 8–10 minutes of footage, with future possibilities for programmable exposure control and cue-based printing.
Right: Soundtrack workflow prototype, consisting of an audio-to-light oscillation unit and a DIY continuous-motion sound camera.


Related Pages:

Contact printing for motion picture film

Variable density sound: historical research

Variable Density Soundtrack Research